Hookup wire for tube amplifier? Audiogon It can be modified to work with all stock stereos, but you may need a few more parts. Wondering what kind of of hookup wire you guys have used and which you liked best. I'm considering OCC copper wire. VHaudio OCC.
How to install an amplifier in your car - I will show you how to do this with an aftermarket head unit (stereo). This overview shows how stereo components connect to an amplifier, and how power and snals. Neatly drape or trim each wire and connect it to the amp.
Connecting your car speakers to an amp use your When you look at the pictures, realize that I am using an amplifier that is too small for the subwoofer. You can connect speakers to an amp by wiring the amp's output wires to the harness behind the stereo, where all the speaker connections are accessible in one.
Connecting speakers to a CONNECTAMP - It is for demonstration purposes and it does not sound as good as it should. This article covers the setup and requirements of attaching speakers to a CONNECTAMP. You can wire 2 or 4 speakers to a single CONNECTAMP.
How to Connect Speakers Using Speaker Wire - In other words, my car needs a bger amplifier to support the subwoofer. -Subwoofer box-Subwoofer speaker (see next step)-Amplifier (see next step)-Wiring kit (or each of the following) -10 Gauge or thicker, 20 foot insulated wire (for power) -10 Gauge or thicker, 3 foot insulated wire (for ground) -18 or 16 Gauge, 15 foot wire -RCA cables, 15 feet or longer (you need 2 or one with both red and white) -In-line fuse, 50 amps or hher-Some speaker wire-4 small wood screws-Basic tools For the power and ground wires, you will need thicker wires depending on how powerful the amplifier is. Using basic wire not the RCA or Optical/TOSLINK kind to connect speakers to a stereo receiver or amplifier is fairly simple because there are only two parts to.
Amp hook up wires:
Rating: 91 / 100
Overall: 90 Rates